AudioRange ITE-1000 Kolay Kurulum Kılavuzu - Sayfa 6

Kulaklıklar AudioRange ITE-1000 için çevrimiçi göz atın veya pdf Kolay Kurulum Kılavuzu indirin. AudioRange ITE-1000 10 sayfaları. In-ear tv headset

How to Wear

Adjusting the Headphones to Wear

The headphones are flexible and can be adjusted into a more comfortable shape.

Adjusting the Headphones for Comfort

If you are experiencing fatigue or discomfort, the headset can be worn behind your

head with the headset hub resting on your neck.

Trouble Shooting

No Sound/Low Sound

Increase the volume on your headset

Increase the volume on your TV

Reset the dock by unplugging the device and turn off headphones. After 60

seconds plug dock in and turn on headphones.

Make sure cables are plugged in appropriately to the back of dock and TV.

Refer to steps 1.

Check the audio being outputted by the TV. Refer to step 4 to make sure TV audio

is set to external speaker.

If the TV sound is currently set to Dolby or Bitstream, set it as PCM and try the

headset again.

If Surround sound (5.1) is selected, set audio to a non-surround sound option.

If you are using a streaming device's such as Netflix TV, Roku, Apple TV, Google

Chromecast, Amazon Fire Stick, or a Smart TV, adjust the audio output settings to

Stereo or Linear PCM output.

Muting the TV

If you wish to mute the TV and only use headset audio, the transmitter will have to

be plugged into the TV itself, not the cable or TV box.

Distorted Sound

Headphones are too far from the dock. Move closer to the dock or change

the position of the dock.

Dock's signal might be blocked. Do not place dock inside cabinets and

place the dock away from other electronic devices except for the TV it is

connected too.

Charge the headphone, battery may be low.

Can't Charge the Headphone

Check to see that the AC adapter is properly connected to the dock.

Make sure the headphones are correctly placed on the dock. The charge

indicator lights up RED.

The headphone's contact pins and/or the dock contact pins need cleaning. Use a

dry cotton swab to clean them.

Wi-fi Issues After Transmitter Installation

Wi-fi routers and the headset transmitter operate on the same frequency. If you

notice wi-fi issues then move the transmitter further away from your router.