Dantherm cdp 125 Parça Talimatı - Sayfa 4

Hava Kontrol Cihazları Dantherm cdp 125 için çevrimiçi göz atın veya pdf Parça Talimatı indirin. Dantherm cdp 125 8 sayfaları. Anti vibration stands

Mounting of anti-vibration stands

Purpose of anti-

vibration stands

Contents

Illustration

Tools

Procedure

The anti-vibration stands permit floor mounting of the following dehumidifiers:

The following parts must be included in the package:

 2 stands

 4 vibration dampers

 4 set screws, M8 × 10 mm with Ø8 tension discs

 4 set screws M5 × 16 mm for fixing of dehumidifier

This illustration may be useful during the mounting:

CDP 75

CDP 125

CDP 165

For the mounting of the anti-vibration stands you need an 8 and a 13 mm fork wrench.

Follow the below directions for the mounting of the anti-vibration stands onto the

dehumidifier:

Step

Fit the vibration dampers onto the stands by means of the 4 set screws and

the tension discs as illustrated.

Place the dehumidifier on the stands and fasten by means of the 4 M5 screws.

CDP 75 • CDP 125 • CDP 165

A ±2 mm

745 mm

942 mm

1067 mm

Action

650 mm

850 mm

975 mm