Construct A Truck USA the Dingo Montaj Talimatları - Sayfa 3

Motorlu Oyuncak Araba Construct A Truck USA the Dingo için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Construct A Truck USA the Dingo 4 sayfaları.

Sayfayı Yazdır

Insert rear body side interior trim panels. . . Attach engine cover by sliding 3-3/8" steel pin

through pivot holes, as shown. . .

Slide flat washers onto rear axle and install wheels with nylon lock nuts. Slide winch pieces

onto 1-3/4" steel pin. Apply glue to winch brackets and work winch pin into frame rails and

through clearance holes in winch brackets—when steel pin is fully seated, press winch

brackets into place. Install front wheels with flat washers and nylon lock nuts.