CONSTRUCTA CJE0800S Kullanıcı Kılavuzu - Sayfa 3
Mutfak Aletleri CONSTRUCTA CJE0800S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CONSTRUCTA CJE0800S 10 sayfaları.
Sayfayı Yazdır
WARNING!
Risk of property damage
●
Do not overload the appliance by applying to much
pressure on the products or by allowing the pulp
container to overfill. Your juicer is equipped with
thermal protection which shuts down the appliance
when it overheats. If this happens turn off the juicer
using the on/off switch or unplug it and allow it to cool
for approximately 10 minutes. You can continue to use
the juicer after this time. If the juicer still does not work,
have it repaired by a service centre.
●
Do not disconnect the plug from the socket pulling the
cord.
●
The appliance may only be plugged to an electrical
socket (alternating current only) with a voltage in
conformity with the one given on the rating plate of the
appliance.
●
Do not overload the appliance with too much product
or by pushing it too hard (with the pusher).
●
Switch off the appliance immediately after noticing
strong vibrations or reduced speed. Clean the sieve
and its housing.
●
Stop the operation and unplug the appliance if the
product is blocked in the feeding tube or on the
grinding disc. Remove the cause of the blockage.
●
Immediately stop operation and unplug the appliance
if any liquid has entered into the motor of the juice
extractor. Return the juice extractor to a service point
for inspection.
●
Do not expose the juice extractor to temperatures over
60°C.
●
Do not leave a plugged in appliance unattended.
●
Do not immerse the motor into water. Do not wash it
under running water.
●
Do not use abrasive detergents such as emulsions,
cream cleaners, polishes, etc. to clean the housing.
They may remove the graphic information symbols
such as: scales, marks, warning signs etc.
●
Place the motor body near a socket on a flat, stable
surface so that the vent holes of the appliance are not
covered.
HINT
Information on the product and
hints on its use
●
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions shall change.
●
Unplug the appliance after operation.
●
Use a soft brush to wash the metal parts especially the
sieve with the sharp grinding disc.
377-123C_v02
●
Do not wash metal parts in the dishwasher. Aggressive
detergents used in the dishwasher cause these parts
to darken. Wash them manually using traditional
dishwashing liquids.
●
Before the first use, wash thoroughly all elements of
the equipment.
Technical data
The technical parameters are quoted on the nameplate of
the product.
Admissible time of non-stop operation
An interval between repeated operation
Noise generated by the appliance (L
* appliance colour
Description
Motor base
1
On/Off button
2
Clamps
3
Clutch
4
Juice bowl
5
6
Strainer basket
7
Cover
8
Food pusher
Before operation
Before the first use, dismantle the juice
extractor, wash and dry the parts that have
contact with the processed product.
1 Place the motor on a hard, clean and dry surface near
the electrical outlet.
2 Grasp the clamps on both sides of the appliance and pull
them away from the motor housing.
3 Lift the clamps, release the lid and lower the clamps.
4 Take out the food pusher. Remove the lid and the bowl
together with the sieve.
Juice extractor assembly
1 Insert the bowl on the motor so that the groove fits into
the slit of the motor housing.
2 Insert the sieve on the driver, press until stop and check
if it is correctly inserted and it turns easily.
3 Insert the lid on the bowl.
4 Lift both clamps and insert the fastenings in the openings
of the lid.
5 Press the clamps to the housing (you will hear
a characteristic click).
6 Place an appropriate utensil under the groove discharge.
15 minutes
30 minutes
)
80 dB/A
WA
A
B
C
5