Abus WIRELESS ALARM SYSTEM Kullanıcı Kılavuzu - Sayfa 6
Güvenlik Sistemi Abus WIRELESS ALARM SYSTEM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Abus WIRELESS ALARM SYSTEM 14 sayfaları.
Sayfayı Yazdır
Chapter 4 Creating a new client
To make changes to your ABUS wireless alarm system, you first have to create a new client. Select the Clients dropdown menu. You
can now change the information on the Client information page.
After creating a new client, you can program it. You can program the client offline (i.e., you are not connected to the client) or online
(i.e., you are connected to the client by a modem or USB.
Chapter 5 Connecting to the client
There are two ways of connecting to the client:
•
By modem
•
By a direct USB link
Before connecting, make the connection settings. You change these settings in the Options dropdown menu.
5-6
Select New client.
After entering data,
select Save client.
You can now print
the input data under
Print client.
Select Remote for a modem connection.
Select Local for a USB connection.
Select System
configuration.
Select Print options
to change the printer
settings.
Select Interface
Language to
change the software
language.
Select Remote COM Port
(modem) for a modem
connection. This is usually
port 1. For more
information, see the
Hardware Manager of your
PC.
Enter a serial
number under Client
Number.
Enter a name.
Enter a telephone
number.
Enter a U/D
telephone number.
This number is
dialled if you make a
remote call by
modem.
Enter the city, the
state and the ZIP
code.
Enter a comment.
Select Direct COM Port for a
direct USB connection. This is
usually port 2 or 3. For more
information, see the Hardware
Manager of your PC.