DanVex AD-10000 Kullanım Kılavuzu - Sayfa 9

Nem Alıcı DanVex AD-10000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DanVex AD-10000 18 sayfaları. Adsorption air dehumidifier

9. Press «F1» to start the dehumidifier. The dehumidifier will start with default settings. Use «F4»

button to stop the dehumidifier. It should be noted that after switching off the fans and the rotor

continue operation for 5-10 minutes to prevent the overheating protection tripping.

10. Press «ESC» to enter the setting menu «Setting data 1». Enter temperature, relative humidity

and regeneration temperature by pressing «▼» or «▲» buttons till the required values are set.

Press «ENTER».

11. Press «▼» or «▲» for navigation, correction of temperature and relative humidity range.

Press «ENTER».