Consult IX CellWizard WTX-35-A Kullanıcı Kılavuzu - Sayfa 11

Verici Consult IX CellWizard WTX-35-A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Consult IX CellWizard WTX-35-A 15 sayfaları. Cw & wcdma test transmitter

Sayfayı Yazdır

Starting a test scenario

Start a new test

Press the hard button "RF ON/OFF". This will recall last configuration

test.

Then you can edit any parameter –if needed- and press "RF ON/OFF"

again to start transmitting

Alternatively, from main menu, go to "Start Test", and click Enter.

Adjust the new test channel configuration parameters through the

following steps:

Choose the transmitting mode either CW or W-CDMA (WTX-05-W

and WTX-05-A)

Write test channel frequency in the relevant band (std. frequency

step of 200 KHz)

Write channel amplitude

Write scrambling code "for W-CDMA mode only" in the range between 0 to 511

To start/stop transmitting, press the RF ON/OFF button. You will notice the RF indicator

appears/disappears on the screen

P a g e

| 11