Audiotec Fischer Match PP 86DSP Manuel - Sayfa 2

Amplifikatör Audiotec Fischer Match PP 86DSP için çevrimiçi göz atın veya pdf Manuel indirin. Audiotec Fischer Match PP 86DSP 15 sayfaları. 8-chanell amplifier with integrated 9-chanell dsp

Audiotec Fischer Match PP 86DSP Manuel
Congratulations!
Dear Customer,
Congratulations on your purchase of this innovative
and high-qual ity MATCH product.
With the PP 86DSP, MATCH is setting new stan-
dards in the evolving plug & play market.

General instructions

General installation instructions for MATCH
components
To prevent damage to the unit and possible injury,
read this manual carefully and follow all installation
instructions. This product has been checked for
proper function prior to shipping and is guaranteed
against manufacturing defects.
Before starting your installation, disconnect the
battery's negative terminal to prevent damage
performance and to ensure full warranty coverage,
we strongly recommend to get this product installed
by an authorized MATCH dealer.
Install your PP 86DSP in a dry location with suf-
a solid mounting surface using proper mounting
hardware. Before mounting, carefully examine the
area around and behind the proposed installa-
tion location to ensure that there are no electrical
cables or components, hydraulic brake lines or any
part of the fuel tank located behind the mounting
surface. Failure to do so may result in unpredictable
damage to these components and possible costly
repairs to the vehicle.
We wish you many hours of enjoyment with your
new MATCH PP 86DSP.
Yours,
AUDIOTEC FISCHER
General
motor vehicles which have a 12 Volts negative ter-
minal connected to the chassis ground. Any other
the electrical system of the vehicle.
The positive cable from the battery for the entire
sound system should be provided with a main fuse
at a distance of max. 30 cm from the battery. The
For a proper
value of the fuse is calculated from the maximum
total current draw of the car audio system.
Use only the enclosed MATCH cable for con-
nection of the PP 86DSP. The use of other
cables can result in damage of the ampli-
only be replaced by identically rated fuses (2 x
Prior to installation, plan the wire routing to avoid
any possible damage to the wire harness. All
cabling should be protected against possible
crushing or pinching hazards. Also avoid routing
cables close to potential noise sources such as
electric motors, high power accessories and other
vehicle harnesses.
instruction
for
connecting
the
15