Addonics Technologies HDUS11NB Kullanıcı Kılavuzu - Sayfa 12
Disk Çoğaltıcı Addonics Technologies HDUS11NB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Addonics Technologies HDUS11NB 18 sayfaları. 1:11 hdd duplicator nb
Sayfayı Yazdır
Tolerance Size
the source and target capacity. This is to ensure that when the target drive is
smaller than the source drive, the duplication process will not start.
Press ENT to enter the following figure. The default is 0. Use t he Up and Down a rrow keys to
choose 1MB~100MB of source.
BootTime Delay
This opti o n is used to to set boot delay time.
Press ENT to enter the foll
choose 0~99 sec.
Quick Compare
This opti o n is used to set t he size of each comparison unit.
Press ENT to enter the following figure. The default is O. Use the Up and Down arrow keys to
choose 1 Byte/1K/10K/100K/1MB/10MB/100 Mbytes. (In order to improve the accuracy of pure
data can maintain the default settings.)
www.addonics.com
10-11. Setup
Tolerance Size
Tolerance Size
1MB
10-12. Setup
BootTime Delay
fi
t is 5 sec. Use the Up and Down arrow keys to
BootTime Delay
5 sec
10-13. Setup
Quick Compare
Quick Compare
Technical Support (M-F 8:30am - 6:00pm PST)
ff
Phone: 408-453-6212
Email: www.addonics.com/support/query/