Contacta HLD4 Kurulum ve Kullanım Kılavuzu - Sayfa 5

İşitme Cihazı Contacta HLD4 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Contacta HLD4 20 sayfaları. Hearing loop driver

CAUTION: Ensure mains power is disconnected BEFORE any audio

connections are made to the hearing loop driver. To completely

disconnect the system from the mains, remove the mains plug from

the wall socket.

CAUTION: The top surface of the hearing loop driver may become

hot when operating this system continuously. Do not touch the top

surface during use or block the ventilation holes.

United Kingdom - connection to mains supply:

This apparatus must be protected by a 3amp fuse if a 13amp (BS1363)

plug is used. Be sure to replace the fuse only with an identical

approved type, as originally fitted, and to replace the fuse cover.

IMPORTANT: The wires in this mains lead are coloured in accordance

with the following code:

Blue: Neutral

Brown: Live

If you need to change the mains plug supplied, the colours of the

wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug.

Proceed as follows:

The wire coloured BLUE must be connected to the terminal marked

with the letter N or coloured BLACK.

The wire coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

DO NOT make any connection to the terminal which is marked with

the letter E or coloured GREEN.