DAPAudio Clubmate II El Kitabı - Sayfa 10

Konuşmacılar DAPAudio Clubmate II için çevrimiçi göz atın veya pdf El Kitabı indirin. DAPAudio Clubmate II 12 sayfaları. Clubmate ii

Clubmate II™

For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most

professional audio devices. Follow the configuration examples below for your particular connection.

Maintenance

The DAP Audio Clubmate II™ requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power and then wipe the connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the

fuse burns out, the product will not function whatsoever. If this happens,

so.

Unplug the unit from electric power source.

Insert a flat-head screwdriver into a slot in the fuse cover. Gently pry up the fuse cover. The fuse will

come out.

Remove the broken fuse. If brown or unclear, it is burned out.

Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to

use a fuse of the same type and specification . See the product specification for details.

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

If the device does not operate properly, unplug the device.

Check the fuse, power from the wall, all cables, etc.

If all of the above appears to be O.K., plug the unit in again.

If you are unable to determine the cause of the problem, do not open the device, as this may

damage the unit and the warranty will become void.

Return the device to your Dap Audio dealer.

Ordercode: D3264

follow the directions below to do