Addonics Technologies HDUS325DX Kullanıcı Kılavuzu - Sayfa 6
Disk Çoğaltıcı Addonics Technologies HDUS325DX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Addonics Technologies HDUS325DX 8 sayfaları. Hdd duplicator deluxe
Sayfayı Yazdır
Main Menu:
1. Copy HDD
Scans the ports, then copies from the source to any targets found.
2. Compare HDD
Scans the ports, then any targets found will be compared to the source.
3. PreScan Source
Reads all blocks on the source drive to confirm no I/O errors are encoun-
tered.
4. ReScan BUS
Manually scans all ports and reports how many units were found.
5. Source Size
Examines the source drive and reports total space and space used, if drive
contains compatible partitions. Press up/down to change display, ESC to exit.
6. Setup
Enters the Setup menu. See Setup Options for details.
7. USB Mode
Not supported.
8. Fast Copy
When this setting is ON, the duplicator will attempt to copy the source drive's
contents instead of the entire disk. Also controls Compare function. Default
setting is OFF.
NOTE:
Target drive size is still required to be equal to or greater than source. Only works with
source drives formatted using Master Boot Record. If the source drive has a boot record other
than MBR, the entire disk will be copied as if Fast Copy were OFF. If the source drive is
formatted with a Master Boot Record and contains only FAT32 or NTFS partitions, identical
partitions will be created on the target(s) and only the files will be copied. If the source drive with
MBR format includes partitions other than FAT32 or NTFS, all sectors of all partitions (including
FAT32 and NTFS) will be duplicated.
Enabling Fast Copy may not produce bootable duplicates.
9. Adv Setup
Enters Advanced Setup Options menu. Only available when holding ESC on
any main menu option. See Advanced Setup Options.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/