Contacta STS-K072 Kurulum ve Kullanım Kılavuzu - Sayfa 8
Mikrofon sistemi Contacta STS-K072 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Contacta STS-K072 16 sayfaları. Window intercom system speaker pod and screen mounted microphone
Ayrıca Contacta STS-K072 için: Kurulum ve Kullanım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
7. Place the speaker pod on the customer side of the counter top, ensuring it
does not cause an obstruction.
8. Speaker pods and staff pods can be either free standing or fixed. Move to
step 14 if you do not wish to fix the pods to the counter.
9. Use cable management holes in the counter to run the staff pod and
speaker pod cables to the amplifier. If there are not already cable
management holes, drill suitable locations near the rear of both the staff
and customer sides of the counter.
10. Remove the top of the pods to gain access to the fixing points.
11. Mark the two fixing points on the bottom of both pods. Then mark two
cable holes to be drilled, one for both the customer/visitor side and the
staff side.
12. Ensure there will be access to retrieve the cables then drill the holes.
13. Fix the pods to their respective counters.
14. Feed the pods' wires through the cable management holes.
15. Route all cabling neatly to the amplifier location on the staff side.
8