DAPAudio D6556 Manuel - Sayfa 7

Konuşmacılar DAPAudio D6556 için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio D6556 12 sayfaları.

WMS-40B

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

01) Remove the speaker grill to gain access to the power tap switch.

02) Turn the tap switch to choose the desired wattage: 5/10/20/40W (100V) and 2,5/5/10/20/40W (70V).

03) Replace the speaker grill.

04) Remove the 2 screws from the mounting unit to gain access to the connectors.

05) Connect the common cable to the (-) connector.

06) Connect the main feed cable to the (+) connector.

07) Replace the mounting unit and tighten the screws.

Ordercode: D6556

Fig. 02

Fig. 03