DAPAudio DRX-10B Manuel - Sayfa 18
Konuşmacılar DAPAudio DRX-10B için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio DRX-10B 20 sayfaları.
Ayrıca DAPAudio DRX-10B için: Manuel (20 sayfalar), Manuel (20 sayfalar)
Sayfayı Yazdır
DRX Passive Series
Model
System Type
Continuous Power
Peak Power
Horn Coverage
Speaker Sensitivity (1W.1m)
Frequency Response
Impedance
Crossover Frequency
Protection
Low Frequency
High Frequency
Enclosure Construction
Mounting
Connectors
Dimensions (H x W x D)
Troubleshooting
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, unplug the device.
2.
Check the fuse, power from the wall, all cables, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5.
Return the device to your Dap Audio dealer.
DRX-15
2-Way Vented Passive Speaker cabinet
200 Watts
400 Watts
50°H x 50°V
96 dB SPL ±3dB Max SPL: 122dB at 1m
50Hz~20kHz (- 6dB)
8Ω
2.8KHz
High Frequency Protection
15" Woofer - 2" Voice Coil
1" Driver - 1" Voice Coil
15mm plywood cabinet, glued and reinforced, resistant
black paint; metal grille, rubber foot.
One ABS plastic standard pole-mount
2 x SPK4
522 x 486 x 736mm
17