DURASTAR DRPDRAD09F1A17 Kullanım ve Kurulum Kılavuzu - Sayfa 7

Termostat DURASTAR DRPDRAD09F1A17 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. DURASTAR DRPDRAD09F1A17 10 sayfaları. Wired thermostat

Sayfayı Yazdır

Wired Thermostat

13
1
ECO
TIME ON
FOLLOW ME
12
TIME
AUXI L
FAN
OFF
HEATER
MOD E
SPEED
SWING
TEMP
11
▼
10
RESE T
LOCK
9
8
7
7. LOCK Button
Used to lock/unlock the thermostat settings.
8. RESET Button
Used to restore the system to its default settings.
9. AUXILIARY ELECTRICAL HEATER BUTTON
For use with third party electrical heaters. Not included with this unit.
10. FOLLOW ME Button
For details, see the FOLLOW ME feature section of this manual.
11. TIME OFF Button
Press to initiate the TIMER OFF feature. For details, see the TIMER feature section of this manual.
12. TIME ON Button
Press to initiate the TIMER ON feature. For details, see the TIMER feature section of this manual.
13. MODE Button
AUTO COOL DRY HEAT FAN
Press to select the operating mode.
1. ON/OFF Button
Press to turn the air conditioner ON and
OFF.
2. UP Button
Press to increase the set temperature in
1°F / 1oC increments.
3. DOWN Button
Press to decrease the set temperature
in 1°F / 1oC increments.
2
4. SWING Button
Function is not available for this model.
3
5. ECO Button
4
For details on ECO mode, see the ECO
5
feature section of this manual.
6. FAN SPEED Button
6
Press to select the following fan speeds:
Auto
Low
Med
High
→
→
→
→
DURASTAR.COM
12
NOTE
• Press the Temp Up and Down buttons (#2 & #3) simultaneously to switch between
Fahrenheit and Celsius (some models).
• The FAN speed cannot be adjusted in AUTO or DRY Mode.
• Press and hold the UP and DOWN buttons simultaneously for 3 seconds to switch
between F and C..

Operating Modes

Setting Temperature
This unit can be set at any temperature between 62 and 86°F (17-30°C) in cool, heat, and dry
modes. You can increase or decrease the set temperature in 1°F (1°C) increments using the TEMP
up (
) or TEMP down (
)button.
Auto
In AUTO mode, the unit will automatically select the COOL, FAN, HEAT, or DRY modes to maintain
the set temperature.
Press the MODE button and select AUTO.
•
•
Set your desired temperature using the TEMP down or TEMP up button.
•
Press the ON/OFF button to start the unit.
Cool
•
Press the MODE button and select COOL.
•
Set your desired temperature using the TEMP down or TEMP up button.
•
Press the FAN SPEED button to select the fan speed: AUTO, LOW, MED or HIGH.
•
Press the ON/OFF button to start the unit.
Fan
Press the MODE button and select FAN.
•
Press the FAN SPEED button to select the fan speed: AUTO, LOW, MED or HIGH.
•
Press the ON/OFF button to start the unit.
•
NOTE
•
You cannot adjust the temperature in FAN mode. As a result, your thermostat's LCD
display will not display a temperature.
Dry (Dehumidify)
•
Press the MODE button and select DRY.
•
Set your desired temperature using the TEMP down or TEMP up button.
•
Press the ON/OFF button to start the unit.
DURASTAR.COM
13