DAPAudio Odin S-218A Ultra Sub Manuel - Sayfa 9

Konuşmacılar DAPAudio Odin S-218A Ultra Sub için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio Odin S-218A Ultra Sub 12 sayfaları.

Sayfayı Yazdır
DAPAudio Odin S-218A Ultra Sub Manuel
Odin S-218A Ultra Sub

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.

Preset Selector

01) Turn the preset selector (06) to choose one of the 10 presets. See below for more information.

Presets

The below presets can be selected according to the preferences of the end user. Each preset consists of
a set of properties, unique for every purpose and location. The presets differ by the EQ, Gain and Delay
settings.
PRESET
NAME
0
Default
Default Phase 180°
1
Inverted
2
Low Sub
Low Sub Phase 180°
3
Inverted
4
Entertainment
Entertainment Phase
5
180° Inverted
6
Cardioid
7
End Fire
8
EMPTY
9
ODIN Editor

Connection Cables

Take care of your cables, always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their life and reliability.
Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges,
etc.) are caused entirely by using unsuitable or faulty cables.
For these applications the unit provides XLR and CAT-5 connectors to easily interface with
most professional audio devices. Follow the configuration examples below for your particular
connection.
Ordercode: D3902
Preset for multipurpose use, set at a level of 0 dB.
Preset (Phase 180° Inverted) for multipurpose use, set at a level of 0
dB.
Preset for live use (Bands/Performances), crosspoint at 105 Hz, set at
a level of 0 dB.
Preset for live use (Bands/Performances) Phase 180° Inverted,
crosspoint at 105 Hz, set at a level of 0 dB.
Preset for entertainment use (DJ/Playback), crosspoint at 125 Hz, set
at a level of 0 dB.
Preset for entertainment use (DJ/Playback) Phase 180° Inverted,
crosspoint at 125 Hz, set at a level of 0 dB.
Use the in-phase preset (0) on the front side and the out-of-phase
(polarity reverse) preset (6) on the rear.
Delaying front subwoofer @1,6m between front-front (@freq 53 Hz).
Default settings, configurable with the ODIN Editor.
8
DESCRIPTION