Audiovalve LUMINARE 2015 Kullanım Kılavuzu - Sayfa 14

Amplifikatör Audiovalve LUMINARE 2015 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Audiovalve LUMINARE 2015 17 sayfaları. Ultra highend headphone tube amplifier

LUMINARE
ultra highend headphone tube amplifier ___________________
LOW IMPEDANCE mode: - test load 32
Ohm:
( max: 4,5 watt power output / ch. )
1 Khz - 0,1 watt - 0,06 %
1 Khz -
1 watt - 0,15 %
1 Khz - 4,5 watt - 1 %
10 Khz - 0,1 watt - 0,06 %
10 Khz - 1 watt - 0,15 %
bandwide: 15 - 100.000 Hz
damping: 15
min.: load 3 ohm ( 3 watt / 0,33 watt -
0,15% )
gain overview :
Low-Imp
Mode: ( red )
( galvanic coupled sym. balanced complementary output STAX connector signal ) summary: 38 db.
OTL , summary:
Mode: ( blue )
supported. Output transformer not in use.
STAX only, summary: 5
Mode: ( yellow )
balanced step up tranformer ) all other jacks not output signal supported.
OTL mode: test load 220
( max: 3,5 watt power output /
1 Khz - 0,1 watt - 0,015 %
1 Khz -
1 Khz - 3,3 watt - 1 %
10 Khz - 0,1 watt - 0,08 %
10 Khz - 0,5 watt - 0,1 %
bandwide: 12 - 150.000 Hz
damping: 600
gain: 32 dB
max. load 2000 ohms
tested example:
1200 Ohm load: 5.5 Watt
max: -
New Audeze "Prototype-Z"
signal on all black headphone jacks 16.5dB /
32dB ( amps gain only, step - up transformer less ) - STAX connector not signal
0dB ( 32dB +2,5 dB auto gain increase +15.5dB galvanic coupled
Ohm.
ch. )
1 watt - 0,08 %
and STAX connector 32dB + 6dB
STAX mode: ( auto gain
control )
bandwide: 15 - 150.000 Hz
bias: 300 + 580 VDC
Vpp: max: 1700 VAC
gain: 34,5 dB + 15,5 dB = 50dB