DAPAudio D6148 Manuel - Sayfa 7

Amplifikatör DAPAudio D6148 için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio D6148 16 sayfaları.

Description of the device

Features

The MA-460 is a matrix amplifier. This gives you the functionality to route any input to any output. With this

functionality you can control 5 audio sources in 4 different areas from one unit. Each input is equipped

with adjustable gain and two band tone control. At the front panel you can monitor each zone with a

pair of headphones and plug in a MP3 player with a 3,5mm jack cable. Each zone has its own VU meter

which gives you the output level in one overview. All zones are equipped with pre amp outputs to extend

the system with extra mono amplifiers like the DAP VPA series.

Features:

• 4 individual 60W outputs

• 5 Inputs with matrix functionality

• Bass & Treble control on each channel

• Front line input: 3,5mm Jack

• Pre amp zone outputs

• Telephone paging with volume & zone control

• 4/8 Ohm & 70/100V output

• Monitor output

• Priority on input 1

• Limiter protection Features:

Fig. 1

1. Channel bass control

Use to adjust the Bass frequencies for each channel to your preference.

2. Channel treble control

Use to adjust the treble frequencies for each channel to your preference.

3. Zone assign buttons

Use to assign a channel to one or more zones.

4. Channel mute LED

Lights up if the corresponding channel is muted.

5. Aux input

3,5mm stereo mini jack input for connecting a line level device such as an I-pod, CD player etc.

6. Aux level

Use to adjust the input volume level for the aux (5) input.