DAPAudio PA-16120 Manuel - Sayfa 13

Amplifikatör DAPAudio PA-16120 için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio PA-16120 20 sayfaları. Public address amplifier
Ayrıca DAPAudio PA-16120 için: Manuel (12 sayfalar)

Sayfayı Yazdır

PA-7120

Installation

Remove all packing materials from the PA-7120. Check if all foam and plastic padding is removed.

Secure the equipment into a 19" rack if preferred. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.

Before powering up the first time, make sure that the AC selector is set to the proper

voltage!

Damage caused by connecting the amplifier to improper AC voltage is not covered

by any warranty!

Always turn off and disconnect the amplifier from mains voltage before making audio

connections. The attenuators should always be turned down during power-up.

Connecting Inputs

Use the jack inputs on the front panel or the XLR input connectors on the rear to supply audio signals to

your DAP Audio PA-7120 amplifier. The jack connectors accept unbalanced audio connections while the

XLR connectors accept balanced and unbalanced audio connections.

Ordercode: D6151