DAPAudio VPA-150 Ürün Kılavuzu - Sayfa 11

Amplifikatör DAPAudio VPA-150 için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. DAPAudio VPA-150 13 sayfaları. Palladium vpa series
Ayrıca DAPAudio VPA-150 için: Kullanıcı Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Maintenance

The

Dap Audio Palladium 100V Series

requires almost no maintenance. However, you should keep the unit

clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

Troubleshooting

DAP Audio Palladium 100V Series

This troubleshooting guide is meant to help solve simple problems.

If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates

properly, do not carry out following steps.

1. If you experience low output or no output at all, unplug the amplifier immediately.

2. Check power from the wall, all cables, the fuse, etc.

3. If all of the above appears to be O.K., plug the unit in again.

4. If nothing happens after 30 seconds, turn off the amplifier and unplug the device.

5. Return the machine to your DAP Audio dealer.