DAPAudio D1477B Kullanıcı Kılavuzu - Sayfa 12

Mikrofon DAPAudio D1477B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAPAudio D1477B 20 sayfaları.

EDGE EHM-1

To manually set the device and the receiver to the same channel and frequency, follow the steps below:

Select a group, channel and frequency on the receiver. Refer to the user manual of the receiver.

Select a group on the device. See 5.1.2.1. Group on page 12.

Select a channel on the device. See 5.1.2.2. Channel on page 13.

Select a frequency on the device. See 5.1.2.3. Frequency on page 13.

Operation

To operate, talk or sing into the device. The AF signal strength indicator on the receiver increases or

decreases during talking/singing.

After use:

Mute the transmitter to prevent the occurrence of a popping sound. See 5.1.1. Mute on page 11.

Switch off the receiver and the device. Refer to the user manual of the receiver and see 4.3.2.

Switching ON/OFF on page 10.

●

Press the SET button (09) to open a menu and to confirm a selection.

●

Press the UP/DOWN buttons (10/05) to navigate through the options or to increase/decrease values.

During operation you can mute the device with the power button (03).

●

Press the power button (03) to mute the device.

●

Press the power button (03) again to deactivate mute.

Product code: D1477B

A) Transmitter battery status

B) Frequency

C) Group (A–J) and channel (1–14)

D) Transmitter lock

E) Gain level

Fig. 05