Belimo FS Series Talimat Sayfası - Sayfa 15

Motor Belimo FS Series için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. Belimo FS Series 18 sayfaları. Replacement of multiproducts motors
Ayrıca Belimo FS Series için: Talimatlar Kılavuzu (20 sayfalar), Değiştirme (19 sayfalar)

Sayfayı Yazdır
Belimo FS Series Talimat Sayfası
Read Data Sheet provided in box with each actuator for specific wiring details.
WARNING!
Actuator anti-rotation strap may not be screwed to the duct. It must attach to
either the sleeve or to the mounting bracket. The duct must be able to fall away
from the damper in case of ceiling collapse in a fire.

Wiring

Disconnect and lock out power before starting to disconnect old motor.
There are three wiring schemes that describe all applications. While the geometry of the wire
runs may vary, the connections are straightforward.
Regardless of the wiring routes used, this drawing shows the wiring necessary for a UL555S
damper and actuator. Use it as a basis for any of the other wiring schematics. Note that the
alarm connections are not touched when replacing an actuator. This is a major concern for Fire
Marshals.
INSTRUCTION SHEET
WARNING!
Replacement of Multiproducts motors with Belimo FSxx Series
WARNING!
15