Abus PLBW10000 Manuel - Sayfa 12

Güvenlik Sensörleri Abus PLBW10000 için çevrimiçi göz atın veya pdf Manuel indirin. Abus PLBW10000 18 sayfaları. Dual motion detector
Ayrıca Abus PLBW10000 için: Hızlı Kılavuz (2 sayfalar), Hızlı Kılavuz (4 sayfalar)

Sayfayı Yazdır

2.4. Reset factory settings

2.5. Waking up the device / Wake-up

Press the Link button 3 times quickly (within 1.5

seconds).

Press quickly (within 1 second)

a fourth time and press and hold the Link button for at

least 5 seconds.

The device is now reset to factory settings.

Hint:

This procedure should only be used if the primary

network controller is not capable of acting.

If the device is set to factory default, the status is set

to "not included" and the association settings and

possible configurations are reset to default.

Press the Link button once to wake up the device. It

then establishes a connection to the Z-Wave controller

and transmits the current status.

English