DAPAudio D6534 Manuel - Sayfa 7

Kayıt Ekipmanları DAPAudio D6534 için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio D6534 8 sayfaları.

VPC-12

06) Connect the main feed cable (+) to the OUT+ connector, and connect the other end to the main

feed connector on your speaker.

07) Now, if you press the emergency button, the circuit will open. The 100V amplifier outputs will be

muted and the emergency signal will be audible.

Troubleshooting

DAP Audio VPC-12

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

01) If the device does not operate properly, disconnect the device.

02) Check power from the wall, all cables, connections, etc.

03) If all of the above appears to be O.K., connect the unit again.

04) If nothing happens after 30 seconds, disconnect the device.

05) Return the device to your DAP Audio dealer.

Line voltage:

Power consumption:

Material:

Mounting::

Mounting hole:

Dimensions:

Weight:

Design and product specifications are subject to change without prior notice.

Ordercode: D6534

100V

12W

ABS

flush, surface

Ø 50 mm

80 x 40 x 155 mm (LxWxH)

0,28 kg

Website:

www.Dap-audio.info

Email: