DAQ system UVC-FRM01 Kullanıcı Kılavuzu - Sayfa 4

Anakart DAQ system UVC-FRM01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAQ system UVC-FRM01 14 sayfaları.

2. UVC-FRM01 Function

As shown in [Figure 2-1], in the case of UVC-FRM01, the overall control is in charge of

FPGA Core Logic. Its main function is to receive video signals such as HD-SDI (high-definition

serial digital interface), NTSC (National Television System(s) Committee), and PAL (Phase

Alternation Line) through the external I/O connector to receive UVC (USB Video). Class) again

to the external connector. These functions can be performed immediately without using a

separate API.

The external I/O connector uses 51-pin Hirose DF9-51S-1V_SOCKET, and refer to Section

3.3.4 for detailed signal specifications.

External I/O

USB Signal

HD_SDI

or PAL

I2C

POWER

UVC-FRM01

SSTX+/-

UVC

SSRX+/-

Controller

D+

D-

HD-SDI or

Serial In

PAL

Mode_S

Selection

SDA

SCL

GND

Voltage

Regulator

[Figure 2-1. UVC-FRM01 Block Diagram]

UVC-FRM01 Users Manual (Rev 1.0)

FPGA Core Logic

http://www.daqsystem.com