Duratuf D3 Kullanıcı El Kitabı - Sayfa 11

Garaj Kapısı Açıcı Duratuf D3 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Duratuf D3 20 sayfaları. Roller door opener

5.2 DOOR TRAVEL LIMIT SETTING

Pull down the manual release lever, the door opener

is under manual mode.

Open the door by hand until the door touches the

upper door stop (see Fig.7). Close the door by hand

until the door touches the ground (see Fig.8).

Push up the manual release lever, the door opener

is now under electric mode.

Press 'SET' button and hold on until LED displays

figure '1', then adjust the up limit by pressing the 'up'

button. Fine-tune using 'up' or 'down' button to

determine the final up limit position, then press 'SET'

button to confirm. The display will now show a '2'

automatically.

Adjust the down limit by pressing 'down' button.

Fine-tuning 'up' or 'down' button to determine the

final down limit position, then press 'SET' button.

The opener will operate a cycle automatically to

remember the limit positions and the opening &

closing force. If completed correctly, a 'half 11' will

be displayed on the control panel indicating that the

unit is in standby mode. If this does not occur then

repeat the steps above.

SETTING PROCESSES:

Press 'SET' button

Press 'SET' button to confirm the setting

Display '1'

Press 'UP' or 'DOWN' button to adjust the opening height

Display '2'

Press 'DOWN' or 'UP' button to adjust the closing height