DuraVent DVL Kurulum Talimatları Kılavuzu - Sayfa 5

Fan DuraVent DVL için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. DuraVent DVL 8 sayfaları. Double-wall, close clearance connectors

Sayfayı Yazdır

INSTALLATION:

Attaching DVL to a DuraVent Chimney

•

Trim Ring Adapters (Figure 2)

Insert inner sleeve into outer sleeve (if

applicable).

Slide Ring over lower portion of adapter.

Insert large end of adapter's inner sleeve

over the chimney's inner sleeve in the

support box or wall thimble.

Screw the Trim Plate to the support box or

wall thimble.

Slip top piece of DVL pipe over adapter and

screw together, you may need to pre-drill

the hole in through the piece of pipe.

•

Clip designed adapter (Figure 3)

Insert larger diameter of adapter around

sleeve in the support box or wall thimble

until clips are seated/locked.

Slip top piece of DVL pipe over adapter until

clips are seated/locked

Figure 2

Figure 3

DVL Pipe

Length

Attaching DVL to a Finishing Collar

(Figure 4)

Slide first piece of DVL pipe over the inner

sleeve of the Finishing Collar and secure

with screws, you may need to pre-drill the

hole through the piece of pipe.

Pipe

Overlap sections

•

Pipe section overlap ¾"

(3) screws at each connection (#8 x 3/8"

screw) equally spaced.

Adjustable

Pipe

Figure 5

Adjustable Pipe (Figure 5)

Slide Adjustable Pipe over a straight length of

pipe

Screw Adjustable pipe to mating pipe to lock

pipe to desired length

Finishing

Collar

Figure 4

DVL Pipe

Length