Contempocat Concealer Cabinet Montaj Talimatları
İç Mekan Mobilyaları Contempocat Concealer Cabinet için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Contempocat Concealer Cabinet 2 sayfaları. For litter-robot-3 open air
Sayfayı Yazdır
What's In The Box?
The following components are included in your package:
● Left and Right Side Panels
● Top Panel
● Back Panel (1/8" thick hardboard)
● Back support bar
● Alignment Guide
● (8) decorative hex-head screws
● (8) 5/8" long phillips-head screws
● (1) hex key
Let's Get Started!
We recommend TWO (2) people for assembly of this item.
1
Install "back support bar" and "top panel"
b) Flip cabinet upright. Making sure the routed
lip is facing downwards and towards the back,
carefully slide the top panel into the grooves in
the sides until the back is flush with the side
panels.
c) Secure with 4 decorative screws.
Concealer Cabinet
a) Position left/right panels "face down" as
shown, making sure the 2 pilot holes in the long
edge of the support bar are facing down and
the 3 pilot holes (dashed arrows) in the support
bar are facing outward.
Secure the support bar with two decorative
screws.
-For Litter-Robot-3 "Open Air"
-Assembly Instructions