Contemporary Controls CTRLink EISK5-GT Kurulum Kılavuzu - Sayfa 3
Anahtar Contemporary Controls CTRLink EISK5-GT için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Contemporary Controls CTRLink EISK5-GT 4 sayfaları. Plug and play gigabit switching hub for automation systems
Sayfayı Yazdır
Power Options
Power Considerations
Voltage in the specified range must deliver current commensurate with power
consumption. The recommended size for solid power conductors is 16–22 AWG; for
stranded conductors, use 16–18 AWG. COM is directly connected to zero volts and the
chassis is isolated from zero volts. Input connections are reverse-polarity protected.
Network Connections
The switch employs Auto-MDIX technology so that either straight-through or crossover
cables can be used to connect to network interface adapters or to another hub.
LED Indicators
The ―PWR‖ LED glows solid green when the switch is properly powered. To aid in
troubleshooting, each port has two LEDs. The Port 1 LED labelled ―H‖ glows if a link
exists at 1000 Mbps (green) or at 100 Mbps (yellow). The LED labelled ―L‖ is normally
unlit but glows yellow if a 10 Mbps link exists. Either the ―H‖ or ―L‖ LEDs flash to show
activity. The LEDs of Ports 2–5 are unlabeled but work the same.