DURAVIT Vero VE 6414 Kurulum Talimatları Kılavuzu - Sayfa 8

İç Mekan Mobilyaları DURAVIT Vero VE 6414 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. DURAVIT Vero VE 6414 17 sayfaları.

For wood stud walls, bolts should

be screwed into wood backing.

Install the vanity drawers.

Apply silicon beads between

washbasin and the wall.

MAL_Vero_VE6414/15.04.1

When mounting the washbasin

into a wood stud wall, there

must be adequate bracing.

We recommend doubling up

2 x 6's or 2 x 8's between

the studs to form a solid

anchoring point.

Screw mounting bolts into the

pre drilled holes with an

adjustable wrench.

Screw in the full length of the

mounting bolt, so that the lag

thread is no longer visible.

Carefully slide washbasin onto

the mounting bolts. Insert

the white plastic sleeve over

bolt and into the hole in the

washbasin.

Install provided washer and nut.

Hand tighten the nut, so the

washbasin is secure.

Install the siphon.

Remove the plate.

Close the drawer.

Level the vanity drawer by

adjusting two screws.

Pull the drawer out.

Adjsut the back of the drawer.