4B RG1V56A Kullanım Kılavuzu - Sayfa 10

Endüstriyel Ekipmanlar 4B RG1V56A için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 4B RG1V56A 16 sayfaları. Rotary level indicator

1. Follow the safety rules below when installing this product.

2. Check that the unit is correctly installed (see standard wiring diagram).

All the appropriate safety precautions must be taken when electrically operated equipment is used, in

order to reduce the risk of fire outbreaks, electric shock and injuries to persons.

- Keep the work zone clean and orderly. Accidents are more likely to occur in untidy areas and

environments.

- Before beginning work, make sure that the level gauge is in a perfect condition. Damaged or broken

parts must be repaired or replaced by competent personnel authorized by the Manufacturer.

- All verifications, inspections, cleaning and maintenance operations, part changes and replacements,

must be carried out with the level gauge disconnected and the plug removed from the power socket.

- It is absolutely forbidden for children, unauthorized and/or inexperienced persons to touch or use the

level gauge.

- Make sure that the electricity system complies with the laws in force. Make sure that the earthing is

efficiently connected when the instrument is installed.

Make sure that the power socket is suitable, that it complies with the laws in force and that it has a built-

in automatic protection circuit-breaker. The level

gauge must never be stopped by detaching the plug; moreover, never use the cable to pull the plug

from the socket.

- Periodically check to be sure that the cable is in perfect conditions and replace it if damaged. This

operation must only be carried out by competent and

authorized persons. Only use extension cables of the permitted type and marked.

- Do not allow children or unauthorized persons to touch the cable when the instrument is plugged in.

- The models with signal lamp must be protected from direct exposure to sunlight.

FAULT

Paddle is not rotating

TESTING AND COMMISSIONING

WARNING

Check power supply.

Manufactured by: CamLogic Snc, 42025, IT

REMEDY

PAGE 10