Aplisens APM-2 Cihaz Kılavuzu - Sayfa 9
Verici Aplisens APM-2 için çevrimiçi göz atın veya pdf Cihaz Kılavuzu indirin. Aplisens APM-2 17 sayfaları. Smart electronic differential pressure transmitters
Sayfayı Yazdır
INTRINSICALLY-SAFE Exi TRANSMITTERS ACCORDING
8.1.
TO CERTIFICATE JSHP 22 ATEX 0051X
8.2.
Standards used for assessment
The transmitters are manufactured in compliance with the following standards:
EN IEC 60079-0:2018; (IEC 60079-0:2017 ed. 7.0),
EN 60079-11:2012; (IEC 60079-11:2011 ed. 6.0.).
8.3.
Transmitter
certificate JSHP 22 ATEX 0051X
The following ATEX markings apply only to intrinsically safe transmitters:
ATEX:
II 1/2G Ex ia IIC T5/T4/T3 Ga/Gb
II 1D Ex ia IIIC T100ºC/T135ºC/ T155ºC Da
JSHP 22 ATEX 0051X
As standard, the transmitters are manufactured for explosive gas atmospheres.
A customer can also order a transmitter for explosive dust atmospheres.
8.4.
Minimum supply voltage
Table 1. Minimum supply voltage of an Exi transmitter.
Minimum supply voltage for
transmitters with backlight off
*) Backlight can only be turned on at transmitter manufacturing
stage.
8.5.
Load resistance
a) For a linear power supply from a barrier:
b) For power supply from a trapezoidal or orthogonal source.
Rw – baririer resistance;
Uzas – minimum voltage of the barrier used.
Revision 01.A.001/2022.09
explosion-proofing
13V
− 13 − (
=
max [Ω]
=
max [Ω]
designations
Minimum supply voltage for
transmitters with backlight on *)
16V
∗ 0.02066)
0.02066
− 13
0.02066
EN.IX.APM.2
according
to
9