4CR 9751.0003 IR 3C Kullanım Kılavuzu - Sayfa 5
Aksesuarlar 4CR 9751.0003 IR 3C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 4CR 9751.0003 IR 3C 12 sayfaları. Shortwave infrared curing lamp
Sayfayı Yazdır
The shortwave infrared curing lamp is divided into 3 parts (a base, a column and a cassette).
1) Installation of the base.
a. Open the packing of the base.
b. Install the four wheels on the base respectively and tighten up the screws. Usually, the
wheels with brakes should be mounted on the rear of the base.
2) Installation of the column.
a. Open the packing of the column.
b. Put the column vertically on the top of the base, directly engage the screw holes and
tighten up using the screws.
c. Connect the support arm with the column for supporting the cassette.
d. Connect the lifter with the column to control the up and down movement of the cassette.
3) Installation of the cassette.
a. Open the packing of the cassette with care.
b. Connect cassette with support arm and tighten up with the screws.
c. Connect control wires and adjust the angle of cassette.
4
7
8
9
10
3. Installation
2
5
6
1
3
Attention!
Check that plugs
are connected.
1. Distance Sensor
2. Support Arm
3. Cassette
4. Column
5. Lifter
6. Lifter Switch
7. Power Switch
8. Overcurrent Protection Switch
9. Base
10. Caster
Page 3