APM Base Unit for Power Over Ethernet APM-201 Teknik Özellikler
Ağ Donanımı APM Base Unit for Power Over Ethernet APM-201 için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. APM Base Unit for Power Over Ethernet APM-201 1 sayfaları. Base unit for power over ethernet
Sayfayı YazdırAPM-201
Base Unit for Power Over Ethernet
1. Features：
1.1. Single-Port Power Injector
1.2. IEEE 802.3af compliant
1.3. No Software Required
1.4. Easy to Install
1.5. Use Existing Ethernet Cable
2. Input Specifications：
2.1. Power Interface ： DC Jack
2.2. Data Interface ： RJ-45 jack
2.3. Input Voltage ： 48V ± 10 %
2.4. Input Current ： 400 mA Max.
3. Output Specification：
3.1. PD Detection & Classification ：
IEEE 802.3af compliant
3.2. Interface ： RJ-45 jack (See Pin Assignment)
3.3. Output Voltage ： 48V ± 10 %(42,53)
3.4. Output Current ： 0.35 A Max.
3.5. Output Power ： 15.4W Max.
3.6. LED Display ： PoE Not Active (Orange), PoE Active (Green)
5. Pin Assignment :
Pin
LAN IN
1
Tx (+)
2
Tx (-)
3
Rx (+)
4
N.C.
5
N.C.
6
Rx (-)
7
N.C.
8
N.C.
6. Mechanical Dimension :
1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist,
www.apm.com.tw [email protected]
(See Pin Assignment)
(See Pin Assignment)
* Applied from External Switching Adapter ( 90 ~ 264Vac)
LAN Out
Pin
Tx (+)
1
Tx (-)
2
Rx (+)
3
+48V
4
+48V
5
Rx (-)
6
GND
7
GND
8
Units : m/m
&
Tolerance : 0.xx ± 0.25
Tel: +886 2 26335543
APM CO., LTD
4. General Specification：
4.1. Operating Temperature ： 0℃ ~ +50℃
4.2. Storage Temperature ： -20℃ ~ +70℃
4.3. Humidity ： Up to 90 %
4.4. Cooling ： Free air convection
Taipei 114, Taiwan, R.O.C.
Fax: +886 2 26330472
1 of 1