Acer 12000 Kullanıcı Kılavuzu - Sayfa 15

Sunucu Acer 12000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer 12000 31 sayfaları. Dual-processor system board
Ayrıca Acer 12000 için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

1. System Board
2. Jumper and Connector Locations

3. Carefully lift up and remove the Pentium II Xeon processor.

1.6.4

Installing and Removing the Terminator

Board

When you are not using all the Slot 2 sockets, you must install a

terminator board into each empty slot.

To install the terminator board:

Position the terminator board over the empty slot.

2. Carefully insert the golden fingers of the terminator board into the

slot until the board fits completely.

Figure 1-10

Installing a Terminator Board

3. Use the retention mechanism cover to secure the processor by

pressing it down until it locks with the retention mechanism. See

figure 1-6 for the illustration.

System Board

1-15