Abus Vitess Mortise Servis Kılavuzu - Sayfa 4
Kilitler Abus Vitess Mortise için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Abus Vitess Mortise 20 sayfaları.
Sayfayı Yazdır
ABUS LOCKING SYSTEMS
ABUS LOCKING SYSTEMS
ABUS locking systems are ideal for programs of various sizes, from small to large
master key systems. The range covers keyed alike cylinders, small and medium
master key systems, as well as large grand master key systems. If requested, the
planning and calculation of the grand master key system can be done by ABUS
Pfaffenhain™.
All cylinders of ABUS Pfaffenhain™ have a core diameter of 14mm (0.55"). This
increased diameter enables a very large number of combinations inside of the
cylinder, making very large and complex grand master key systems with ABUS
possible. These locking systems offer 1.5 million true key differs!
STRONG DRILL PROTECTION
• ABUS locking systems offer superior drilling protection
compared to competitors
• 4 additional hardened steel pins are inserted into the
cylinder (two per cylinder core and housing) and an additional carbide pin is inserted into the front
of both housing sides
GRAND MASTER KEY SYSTEMS WITH A GUARANTEED SUPPLY FOR THE
NEXT 20 YEARS
14
A grand master key system is a long-lasting investment in security. ABUS guarantees to supply needed
mm
cylinders or single parts up to 20 years after the creation of the grand master key system. Of course, the
0.55˝
system can also be extended - mechanically or electronically - at any time. For this ABUS plans 20%
extension reserve in advance.
VITESS™ LOCKING SYSTEM
Intop System
Key cuts
Paracentric
precision
profile
4
Standard drill protection -
pins made of hardenend steel
6 locking elements
Intop System
Intop
System
Patented
until 2034*
Trademark
Protection
*Patent pending, max. patent term 2034
HIGHLIGHTS OF VITESS™
• When patent is granted, patented key
control through 2034
• Trademark Intop System restricts
unauthorized key duplication even after
patent expires
• Available in Mortise, Rim, Key-in-Knob/Lever,
Deadbolt and 83 Series™ Locking Insert
TECHNICAL DETAILS
• Patent pending
• 6 locking elements
• 14mm (0.55") core diamter