APODON AM4860N Kullanıcı Kılavuzu - Sayfa 7

Kontrolör APODON AM4860N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. APODON AM4860N 20 sayfaları. Mppt charge controller

Sayfayı Yazdır
6. Wire Connection Sequences
During installation of your MPPT controller, please follow the order of connection below:
1.
Connect the positive battery wire followed by the negative battery wire.
2.
Make sure your solar panels are fully covered to prevent electrical shock.
Connect the positive solar array output wire followed by the negative solar array output wire.
3.
Connect DC load wires to the DC load output (if applicable).
4.
Connect the external temperature sensor to its terminal shown above.
5.
Connect the mobile application module to the communication port (if applicable).
7