DASAN KYS DKC1001 Kullanıcı Kılavuzu - Sayfa 13

Ağ Geçidi DASAN KYS DKC1001 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DASAN KYS DKC1001 15 sayfaları.

DKC1001 USER MANUAL

REPLICATION

Include another controller and transfer the Z-Wave network data to it.

All the Z-Wave devices will be replicated into the new controller.

This is used to transfer data from one controller to another.

LEARN

Let the controller be added to other Z-Wave network, or be removed from the existing

Z-Wave network – if it is a secondary controller or inclusion controller. And the controller

receives network protocol data from other Controllers in inclusion process.

RESET

Factory-Reset the controller functions and Z-Wave network information.

If this controller is the primary controller for your network, resetting it will result in the

nodes in your network being orphaned and it will be necessary after the reset to exclude

and re-include all of the nodes in the network.

If this controller is being used as a

secondary controller in the network, use this procedure to reset this controller only in

the event that the network primary controller is missing or otherwise inoperable.

ABORT

Let the controller abort the current running function if it is possible.

Sending commands

When a node is selected in the node list, Z-Wave commands which the node supports

can be sent to the node. Besides sending commands, the node panel provides some

functions to handle a failed Z-Wave node.

DASANKYS Proprietary & Confidential

DK-DKC1001-001

March, 2017

Page 13