Dash Go DPBD001 Kullanım Kılavuzu - Sayfa 5

Blender Dash Go DPBD001 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dash Go DPBD001 7 sayfaları. Personal

USING YOUR PERSONAL BLENDER

Clean the Personal Blender and all of its components prior to assembly

and use. Remove any stickers and packaging before first-time use.

WARNING: This appliance is NOT designed for blending foods without

liquids.

NOTE: The Personal Blender is designed to function only when the

Processing Cup is correctly inserted into the Motor Base and the top of

the Cup is pressed down.

Place the Motor Base on a stable surface. Plug the cord into a power

outlet.

Place your ingredients in the selected Processing Cup. Make sure

to put all liquid ingredients in first, then powdered ingredients, and

finally any solid ingredients. Do not exceed the MAX level marked on

Cup. Securely attach Blade to Cup by carefully inserting blade end

into Cup and turning the clockwise.

Insert the Processing Cup in the Motor Base with the blade end

down, making sure to fit the locking tabs into the slots located on

the Motor Base.

To begin blending, turn the Processing Cup clockwise in the

Motor Base and press down on the top of the Cup. To discontinue

blending, simply release.

Once you are done blending, lift hand off of Processing Cup and

unplug the Motor Base. Turn the Processing Cup counterclockwise

in the Motor Base and lift to remove. Carefully detach the Blade

assembly from the Cup by turning the black base counterclockwise.

Your blended creation is ready to enjoy! When storing the Cup in the

refrigerator, just pop on one of the Resealable Lids.

CLEANING YOUR PERSONAL BLENDER

IMPORTANT NOTE: Motor Base is not dishwasher safe. Do not

submerge motor base in water or any other liquids. Processing Cups,

Lids and Blade are all top-rack dishwasher safe.

Turn off and unplug the appliance. Remove the Processing Cup

from the Motor Base.

Carefully unscrew the Blade from the Processing Cup. Empty

remaining contents in Processing Cup into the trash.

Fill 1/4 of the Processing Cup with warm water and a few drops of

dish soap. Reattach Blade and return Processing Cup to Motor Base.

Pulse for a few seconds by pressing down on the top of the Cup.

Remove from Base, disassemble and rinse thoroughly with hot or

warm water. Dry with dishtowel.

Wash Resealable Lids and Blade in warm, soapy water. Rinse and dry

thoroughly. Use care when washing Blade as blades are very sharp. If

necessary, gently scrub with dish brush.

Wipe down the Motor Base with a damp cloth. Never submerge

the Motor Base in water or other liquids.