APOLLO VIEW CANCAN Manuel - Sayfa 7

Müzik Pedalı APOLLO VIEW CANCAN için çevrimiçi göz atın veya pdf Manuel indirin. APOLLO VIEW CANCAN 11 sayfaları.

Sayfayı Yazdır
Installation CANCAN
POWER
Before installing CanCan, ensure your Eurorack system is powered off. CanCan is supplied
with a 10-pin to 16-pin power cable. Carefully align the 10-pin end with the 2x5 pin header
on the module's rear. The red stripe on the cable indicates -12V and must align with the
!RED! marking on IOU for proper polarity.
Next, find a 4 HP slot in your Eurorack case for CanCan. Connect the other end of the power
cable to your Eurorack power supply, ensuring the red stripe aligns with the -12V rail. With
the power connection established, mount the module into your case using appropriate
screws and power on your Eurorack system.
The module has reverse protection diodes, which will divert the reverse current to ground in
case of incorrect installation.
7