Abus TVIP82000 Hızlı Kılavuz - Sayfa 2

Dijital Kamera Abus TVIP82000 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Abus TVIP82000 19 sayfaları.

1. Information before installation

The triangular high voltage symbol is used to

warn of the risk of injury or health hazards

(e.g. caused by electric shock).

Please use the power supply unit included with the

scope of delivery.

Do not connect several domes to one power supply

unit, as this could cause an overload or a risk of

fire.

Make sure that the power supply has been

disconnected before connecting the power supply

unit or opening the Speed Dome.

Should smoke, odours or noises be emitted by the

Speed Dome, please switch the device off

immediately and consult our technical support.

If the product is not functioning properly, please

consult your retailer or our technical support. Never

attempt to disassemble the Speed Dome.

We assume no liability for problems caused by

unauthorised repair or maintenance work.

The triangular warning symbol indicates

important notes in this user guide which must

be observed.

Do not drop the dome and ensure it cannot be

knocked. Avoid installation on vibrating surfaces.

Avoid installation in extremely hot, cold, dusty or

moist locations, as otherwise a fire or electric shock

could occur. The operating temperature should

remain between –30 °C ~ 65 °C (outdoor dome)

and –10 °C ~ 50 °C (indoor dome).

The dome for the indoor dome must be protected

from rain and moisture.

Please use the enclosed gloves when opening the

Speed Dome. Avoid direct contact with the dome,

as this could otherwise be damaged.

Please keep the packaging and foam. In the event

of a fault, the Speed Dome must be returned in its

original packaging. Transport without the original

packaging could damage the Speed Dome and

cause additional costs.

English