4DRC 4D-F10 Kullanım Talimatları Kılavuzu - Sayfa 8

Quadcopterler 4DRC 4D-F10 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. 4DRC 4D-F10 16 sayfaları.

11. Preparation instructions before flight

11.1 Turn on the power of the aircraft and place it on

the horizontal plane. At this time, the aircraft

placed on the horizontal plane will automatically

enter the code-matching state, and the front white

light and the red light of fuselage will flash.

Note: Set the aircraft in a correct direction, and the

nose shall face forward. It must be placed on the

horizontal plane.

11.2 Turn on the WiFi function in the mobile device,

select "4DRC_6K_GPS " in the WiFi list, and

open the APP after it connected successfully.

11.3: Turn on the remote control (default mode): long

press the power switch button

the power and the indicator flashes; push the

throttle lever up to the top (step 2) and then to the

bottom (step 3), and thus the frequency matching

is successful, the UAV lights change from flashing

to being permanently on.

It must ensure that the power of the aircraft/remote control is sufficient or

Warning

it cannot take off!

11.4 Horizontal calibration operation:

Short press the horizontal calibration button on the remote control

aircraft will flash quickly. When the white and red lights on the aircraft are always on, it will means that

the calibration is completed (Figure 1).

APP application operation: Click "Set more" icon in the APP interface, and follow the text prompt

steps after entering, and it can also be horizontally calibrated (Figure 2).

Note: In calibration, the aircraft must be placed on a horizontal surface to complete the calibration.

(step 1), turn on

, the white and red lights on the