APP EM-4152 Kullanıcı El Kitabı - Sayfa 10
Amplifikatör APP EM-4152 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. APP EM-4152 17 sayfaları. Professional digital amplifier
Ayrıca APP EM-4152 için: Kullanıcı El Kitabı (17 sayfalar)
Sayfayı Yazdır
- 1. Important Safety Instructions
- 2. Installation
- 3. Structure Diagram
- 4. Interface Illustration
- 5. Operation
- 6. Speaker Protection
- 7. Start-Up Procedure
- 8. Operation Front Panel
- 9. Operation Rear Panel
- 10. Core Parameter
- 11. Maintenance
- 12. Packing Directions
- 13. Warranty
- 14. Warranty Card
- 15. Service Information Card
ΣM SERIES PROFESSIONAL POWER AMPLIFIER
3.4.Operation Rear Panel
1
Item Illustration Functions
Power
1
interface
Signal
2
input
Gain
Switch
4
Mode
Switch
Signal
5
Output
2
Power cord: Standard power cord. Power outlet is the 16A polarized plug
with ground which meets the GB 1002-1996 standard.
Input female XLR: The input plug uses the balanced female XLR plug.
When the gain switch is on 1Vrms, the input sensitivity of the amplifier is 1Vrms.
When it is on 32dB, the amplification gain range is within 32dB. When it is on
26dB, the amplification gain range is within 26dB.
STEREO Mode
Channel A and Channel B work independently. The input signal of the CHA
outputs from the CHA output socket and the same as CHB.
MONO Mode
Channel A and channel B work independently. The output of the channel A is
from the input signal A; the input of the channel B is from the input signal A.
BRIDGE Mode
Channel A and channel B work at the same time, and the output is from input
signal A.
Four core SPEAKON speaker socket: When the amplifier is in the Stereo mode,
CHA\CHB will connect through this socket, the method is below: 1+, 1-.
*The renderings are only for reference, and the actual item is the standard.
4
Description
09
4
5