APPA 605 Kullanıcı Kılavuzu - Sayfa 9

Multimetre APPA 605 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. APPA 605 19 sayfaları.

If the reading for DAR is bigger than 1.3 or PI is bigger than 2,

it indicate a good insulation quality.

When the measured resistance is higher than the maximum

range, the screen will display "Err" symbol for PI/DAR value.

TEST button : Press once to start/interrupt the PI /DAR test.

Blue button : Press once during the PI/DAR test to display the

time left of the test.

The measured values after the PI test

PI=R10-min/R1-min

The measured values after the DAR test

DAR=R1-min/R30-sec