Appareo Stratus ES Pilot El Kitabı - Sayfa 6

GPS Appareo Stratus ES için çevrimiçi göz atın veya pdf Pilot El Kitabı indirin. Appareo Stratus ES 13 sayfaları.

Flight ID screen: Displays the currently entered Flight ID.

Brightness screen: Allows for adjustment of screen brightness while in

flight. Press ENT, then the left or right arrow keys to adjust brightness.

Press ENT again to confirm the new setting.

2.6.

Arrow keys

Use the arrow keys to advance forward and backward when entering

numbers and letters. They can also be used to cycle through the various

display screens.

2.7.

Use the numerical keys to enter information such as the flight ID or

squawk code. See Section 3.1 for directions on how to enter the squawk

code for your aircraft's flight and Section 3.2 for instructions for how to

enter a flight ID.

Sometimes, a textual or non-numerical input will be required. If this is the

case, press the number that is associated with the letter group you want

to input, according to the graphic on the screen. To cycle through the

letters associated with each number, press the number key repeatedly

until the letter you want to input appears. You can input a space after

cycling through all of the letters for a particular number key. Once the

correct character is selected, use the arrow keys to advance to the next

field to enter the next character in the sequence.

2.8.

Identification (IDENT) key

If you are instructed by ATC to IDENT, press the IDENT key on your

Stratus ES/ESG. IDENT will make your aircraft's reply pulse on ATC's

monitors for 18 seconds. "IDENT" will be shown on the display while

IDENT is activated.

2.9.

VFR key

Press the VFR key to broadcast the VFR squawk code. The factory-set

VFR code is 1200, but this number may be reconfigured by your dealer.