Durite 0-441-32 Hızlı Başlangıç Kılavuzu - Sayfa 2

Aydınlatma Ekipmanları Durite 0-441-32 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Durite 0-441-32 2 sayfaları. Led high intensity warning light

Sayfayı Yazdır
FLASH PATTERNS
1. Switch Patterns:
(Yellow wires touch Red wires)
With the LED Light Heads switched on, momentarily apply +VDC to YELLOW wires for less than 1 sec-ond
and release. To reset:
With the LED Light Heads switched on, quickly apply three times + VDC to YELLOW wires and release.
LED Light Head will reset to the factory default pattern (Pattern # 0, Random)
2. Synchronization: (More than 2 sets of LED Light Heads)
First, connect YELLOW wires of all heads together, quickly apply three times + VDC to YELLOW wires and
release for Pattern # 0, Random.
Secondly, momentarily apply + VDC to YELLOW wires to for less than 1 second and release for Pattern #
1, then the synchronization will be functioned.
3. Alternating or Simultaneous Flash: (More than 2 sets of LED Light Heads)
Under Synchronization, connect WHITE wire of LED Light Head 1 to Red wires of all other LED Light
Heads; LED Light Head 1 will alternate with other LED Light Heads.
4. Flash Patterns: 20 selectable strobe patterns
No.
Flash Pattern
0
Random (default)
1
Single (split)
2
Double (split)
3
Quad (split)
4
Quint (split)
5
Mega (split)
6
Ultra (split)
7
Single-Quad (split)
8
Single H/L (split)
9
Single (all) (R65)
DIMENSIONAL DRAWING
SPECIFICATION
Type........................................................Ultra High Intensity LED
Colour.....................................................0-441-30 = AMBER. 0-441-32= BLUE. 0-441-35 = RED
Number of LEDs....................................3
Voltage...................................................12-24VDC
Current...................................................0.35A @ 12VDC
Flash patterns........................................20
Base........................................................Aluminium
Operating temperature........................-20C - +50C.
Protection..............................................IP68
Weight....................................................0.030Kg
Dimensions...........................................Please see above diagram
Compliance...........................................UKCA, ECE R10, R65 Class 1, SAE Class 1
www.durite.co.uk
No.
Flash Pattern
10
Single (all) (SAE)
11
Double (all)
12
Quad (all)
13
Quint (all)
14
Mega (all)
15
Ultra (all)
16
Single-Quad (all)
17
Single H/L (all)
18
Steady 2 (California)
19
Steady 4 (all)
0-441-30/32/35LEAF
FLASH PATTERNS
1. Switch Patterns:
(Yellow wires touch Red wires)
With the LED Light Heads switched on, momentarily apply +VDC to YELLOW wires for less than 1 sec-ond
and release. To reset:
With the LED Light Heads switched on, quickly apply three times + VDC to YELLOW wires and release.
LED Light Head will reset to the factory default pattern (Pattern # 0, Random)
2. Synchronization: (More than 2 sets of LED Light Heads)
First, connect YELLOW wires of all heads together, quickly apply three times + VDC to YELLOW wires and
release for Pattern # 0, Random.
Secondly, momentarily apply + VDC to YELLOW wires to for less than 1 second and release for Pattern #
1, then the synchronization will be functioned.
3. Alternating or Simultaneous Flash: (More than 2 sets of LED Light Heads)
Under Synchronization, connect WHITE wire of LED Light Head 1 to Red wires of all other LED Light
Heads; LED Light Head 1 will alternate with other LED Light Heads.
4. Flash Patterns: 20 selectable strobe patterns
No.
Flash Pattern
0
Random (default)
1
Single (split)
2
Double (split)
3
Quad (split)
4
Quint (split)
5
Mega (split)
6
Ultra (split)
7
Single-Quad (split)
8
Single H/L (split)
9
Single (all) (R65)
DIMENSIONAL DRAWING
SPECIFICATION
Type........................................................Ultra High Intensity LED
Colour.....................................................0-441-30 = AMBER. 0-441-32= BLUE. 0-441-35 = RED
Number of LEDs....................................3
Voltage...................................................12-24VDC
Current...................................................0.35A @ 12VDC
Flash patterns........................................20
Base........................................................Aluminium
Operating temperature........................-20C - +50C.
Protection..............................................IP68
Weight....................................................0.030Kg
Dimensions...........................................Please see above diagram
Compliance...........................................UKCA, ECE R10, R65 Class 1, SAE Class 1
www.durite.co.uk
No.
Flash Pattern
10
Single (all) (SAE)
11
Double (all)
12
Quad (all)
13
Quint (all)
14
Mega (all)
15
Ultra (all)
16
Single-Quad (all)
17
Single H/L (all)
18
Steady 2 (California)
19
Steady 4 (all)
0-441-30/32/35LEAF