Data Harvest EASYSENSE V-Hub Referans Kılavuzu - Sayfa 13
Veri Kaydediciler Data Harvest EASYSENSE V-Hub için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Data Harvest EASYSENSE V-Hub 15 sayfaları.
Sayfayı Yazdır
EASYSENSE V-Hub Reference Manual
From File, Interface select Bluetooth and Network. OK.
Note: When first selected you may need to change Windows firewall
settings to allow network access for this app.
Select the connection status text top
right of the EasySense window.
Select the V-Hub's name (as
displayed on its screen) from the
list.
The connection status will change
to show that it is 'Controlling xx
or Viewing xx the logger.
A link symbol
will indicate connection to a computer.
When you've finished select the connection status icon in the EasySense software to disconnect, then
press the button on V-Hub.
* If auto install fails, download and unzip the drivers for the Bluetooth USB adaptor (Product 2070 or 2071) from the
Data Harvest website. Open Device Manager, right click on the entry for the dongle (typically listed under Other
devices) and select Update drivers. Select to 'Browse my computer' (install manually), locate and select the
BLED112 directory. When installed the adaptor will be listed under the Ports (COM & LPT) section.
When connecting to a iPad or Android device
An iPad will need to support Bluetooth Low Energy (BLE) also known as Smart or 4 (iPad 3 or later or
any iPad Mini). V1.12 or later of the EasySense iPad software must be installed.
An Android will need to support Bluetooth Low Energy (BLE) / Smart – OS 4.4 or later. V1.05 or later of
the EasySense Android software must be installed.
Note: Do NOT pair the devices (when paired V-Hub will not be made available to the EasySense software).
Check in Settings on the device that Bluetooth is On.
Select Bluetooth on V-Hub.
Start the EasySense software.
On an iPad tap on the 'Not Connected' text bottom right of the screen.
On the Android select the connect icon
Select the V-Hub's name from the list.
The status will change to show that it is 'Controlling xx or Viewing xx'.
When you've finished select the connection status icon in the EasySense software to disconnect, then
press the button on V-Hub.
V-Hub in Wi-Fi mode
It is recommended that when possible V-Hub is connected to a power supply when used in Wi-Fi mode
as the power requirements are high, and will drain the battery quickly.
Note: V-Hub stays awake while Wi-Fi is turned on. Disconnect after use as the battery will continue to drain if V-Hub
is stored with Wi-Fi still selected.
Data Harvest Group Ltd, 2017
on V-Hub's screen
, top right of the screen
13
DO260 (2)