Data Harvest EASYSENSE V-Log Kullanıcı Kılavuzu - Sayfa 8

Veri Kaydediciler Data Harvest EASYSENSE V-Log için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Data Harvest EASYSENSE V-Log 17 sayfaları.

Data Harvest EASYSENSE V-Log Kullanıcı Kılavuzu
EASYSENSE V-Log User Guide
Time
Timing
Speed
Acceleration
1 Interrupt card
2 Interrupt card
Picket Fence

Counting

Counting is used to count events by using digital switch type sensors connected to either Input A, or both
A and B or the
buttons on V-Log.
to cycle through simple mathematical functions on the A and B data (A + B, A – B, B – A,
Press
Difference).
Counting

Review

You can use Review to view the readings stored in a data set. The most recently stored data is shown
first.
Review
 Data Harvest Group Ltd, 2014
30mm
► 40mm
50mm
Press stop to exit, then either enter to confirm
your choice or stop to continue logging
0 -------- 10
A
5
B
3
A + B = 8
Snapshot
08/04/14
14:44:09
Data set 1
/42
Use the scroll buttons to go up
or down the list of data sets until
you find the right one, press
to select.
Speed at A
Speed at A or B
3 Speeds at A or B
Speed at A
v= 0.51353 ms
Average measurement over this number of readings
A scroll button can be used instead
of a plug-in sensor to count.
Press the enter button to cycle
through mathematical functions
on the collected data.
21.53 ˚C
1)
21.48 ˚C
2)
Sample 4
Use the scroll buttons to
view the readings taken in
this set of data.
Use the enter button to toggle to a
second screen if more than 3
sensors were logged.
8
DS133 (5)
= 0.61369 ms
-1
#2
-1
n=2
/10
Reading
number