DURKOPP ADLER 8967 Kullanım Talimatları Kılavuzu - Sayfa 13
Dikiş Makinesi DURKOPP ADLER 8967 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. DURKOPP ADLER 8967 15 sayfaları. Preface and general safety information
Ayrıca DURKOPP ADLER 8967 için: Kurulum Kılavuzu (14 sayfalar)
Sayfayı Yazdır
3.5 Setting the Thread Regulator.
1
With the thread regulator the needle thread quantity
necessary for stitch formation can be regulated.
The setting is dependent on the stitch length, material
thickness and the yarn characteristics.
Only a precisely set thread regulator assures an optimal
sewing result.
The needle thread loop should glide over the hook
without excess with little tension.
In the "0" setting the greatest thread quantity is released,
such as is required by particularly great stitch length and
very thick material.
Adjustment:
–
Loosen screw 1.
–
Change the position of the thread regulator
appropriately.
–
Retighten screw 1.
Note
With a correct setting the thread check spring is pulled
approx. 1 mm down from its upper end position when the
needle thread loop passes the maximum hook
circumference.
The 1 mm dimension is a guideline. Depending on the
thread check spring tension it can be greater or smaller.
15